Page 1 of 1

[RESOLVED] Logo 1.7 will not load in VirtualDub

Posted: Sat Feb 26, 2011 11:06 am
by AntrimMan
...simply won't load, the VirtualDub log states the following:
Plugins: Failed to load "C:\Program Files\VirtualDub\plugins\Logo.vdf": Cannot load plugin module "C:\Program Files\VirtualDub\plugins\Logo.vdf": This application has failed to start because the application configuration is incorrect. Reinstalling the application may fix this problem.
I did that with VirtualDub and with Logo 1.7. No joy.
Loaded the latest video driver. No joy.
Paused the McAfee AV software. No joy.
Tried autoloading from the plugins dir as well as manually. Still no joy.

It loads and works fine on the office desktop but not on this desktop at home.
I have made every attempt my meager skills allow. Funny enough the PAN filter loads and works.
So, I am doing the same thing over and over and expecting different results, sounds like insanity is not far off eh?
Something is wrong and I can't find what that is. What am I missing (be kind). Could any one please shed some light on all this?
Thanks.

Re: Logo 1.7

Posted: Sat Feb 26, 2011 11:56 am
by admin
State full machine and OS specs. Also state VirtualDub version.

Re: Logo 1.7

Posted: Sat Feb 26, 2011 12:36 pm
by AntrimMan
Hi, thanks for the quick reply,

this is right off the System Properties General screens:

System:
Microsoft Windows XP
Home Edition
Version 2002
Service Pack 3 (5.1.2600)

machine:
Dell Inspiron 530s
Intel Pentium Dual CPU
E2140 @ 1.60 GHz
1.60 GHz, 0.99GB of RAM
Physical Address Extension
250 GB HDD of which 44GB is free

Display Adapter:
Intel G33/G31 Express Chipset Family
DirectX Version: 9.0
Physical Memory: 1013 MB
Minimum Graphics Memory: 8MB
Maximum Graphics Memory: 128MB
Graphics Memory in Use: 7MB
Driver Version: 6.14.10.4820
Video BIOS: 1471
Current Graphics Mode: 1024 by 768 High Color (75Hz)

Devices Connected to the Graphics Accelerator:
Active Monitors: 1
Monitor Name: Plug and Play Monitor
Display Type: Analog
Gamma Value: 2.20
DDC2 Protocol: Supported
Maximum Image Size: Hor 14.0 inches, Ver 10.0 inches

VirtualDub 1.9.11
Build 32842/release(Fri Dec 24 13:18:44 2010)

Please note from my initial post that the pan (1.0 beta 2) filter from Donald Graft (you I believe) loads fine if that means anything.
Thanks.

Re: Logo 1.7

Posted: Sat Feb 26, 2011 2:26 pm
by admin
I don't have a clue. Try posting about it at the VirtualDub forum.

Re: Logo 1.7

Posted: Sat Feb 26, 2011 3:30 pm
by AntrimMan
I have done so per your suggestion.
Thanks.

Re: Logo 1.7

Posted: Mon Mar 07, 2011 7:34 am
by AntrimMan
RESOLVED.
The loading issue with Logo 1.7 has been resolved by installing the MS update to VC80.crt xxxxxxxxx8.0.50727.4053.
The version on the machine with XP home was not xxxxx.4053.
The full conversation can be seen over on the unofficial VirtualDub support site.
Logo 1.7 is now functioning properly and is a welcome and useful addition.
Thanks for taking the time to develop and for making it available.

Re: Logo 1.7

Posted: Mon Mar 07, 2011 8:17 am
by admin
Thanks for the status update and I'm glad you got it working.

Re: [RESOLVED] Logo 1.7 will not load in VirtualDub

Posted: Mon May 23, 2011 11:29 am
by TheRoofInhabitant
Sorry, I'm having this problem too: could someone post the link for that upload, please?

Re: [RESOLVED] Logo 1.7 will not load in VirtualDub

Posted: Mon May 23, 2011 5:47 pm
by admin
I think it is included in this update:

http://support.microsoft.com/kb/973923

Correct me if I am wrong, AntrimMan. I searched at the VirtualDub forum but didn't find your thread.

Re: [RESOLVED] Logo 1.7 will not load in VirtualDub

Posted: Tue May 24, 2011 10:53 am
by TheRoofInhabitant
Thank you, I'll download it now!
I asked this here because I couldn't find the Thread in the Virtualdub Forum...

Anyway I wanted to thank you for all your plug-ins! Some of them are beautiful and very very useful!

Re: [RESOLVED] Logo 1.7 will not load in VirtualDub

Posted: Tue May 24, 2011 11:14 am
by TheRoofInhabitant
It Works Perfectly!

Here's the Microsoft Download Area link for the other users having the same problem:

http://www.microsoft.com/downloads/en/d ... laylang=en

Thank you so much, admin!

Re: [RESOLVED] Logo 1.7 will not load in VirtualDub

Posted: Tue May 24, 2011 11:27 am
by admin
You're welcome but I merely channeled AntrimMan, so thanks to him too.

Re: [RESOLVED] Logo 1.7 will not load in VirtualDub

Posted: Wed May 25, 2011 8:17 am
by TheRoofInhabitant
Thanks also to AntrimMan, obviouslòy!

Re: [RESOLVED] Logo 1.7 will not load in VirtualDub

Posted: Fri Jan 06, 2012 12:04 pm
by Visitorsama
It doesn work for me, I have a x32, and in the pages, not exit uodate to me, waht sould i do?

Re: [RESOLVED] Logo 1.7 will not load in VirtualDub

Posted: Fri Jan 06, 2012 3:28 pm
by admin
Visitorsama wrote:in the pages, not exit uodate to me
This English is unintelligible to me. Please explain better, but do it in the other thread you created. Thank you.