Binaries Update Notification Thread

Post by **Rocky** » Thu Jan 18, 2024 9:47 am

Slipstream for DGDemux linux 1.0.0.72:

* Added hidden stream marking for the video streams.
* Defeated some disk obfuscation relying on the STN_table.

Sherman

https://rationalqm.us/dgdemux/binaries

Post by **Rocky** » Sun Jan 21, 2024 5:00 pm

eac3to 3.47:

* Fixed command line delay adjustments for disk mode subtitles.

he_he09
* Fixed printing of wrong container frame rate.

SomeHumanPerson
* Cosmetic improvements to eac3to output.

Curly

https://rationalqm.us/eac3to

Post by **Rocky** » Mon Jan 29, 2024 5:11 pm

Slipstream for DGDemux build 1.0.0.72:

* Fixed major bug in -sp that could cause loss of content from the end of the movie.

arrgh
* Fixed -sp and -collapse not playing nice together.

https://rationalqm.us/dgdemux/binaries

Post by **Rocky** » Wed Jan 31, 2024 6:01 am

eac3to 3.48:

* Added -destpath="path" option to allow the destination folder
for output files to be specified.

Curly

https://rationalqm.us/eac3to

Post by **Curly** » Sat Feb 03, 2024 8:51 am

eac3to 3.49:

* Fixed -destpath option when it is the last option on the command line.
* Stopped eac3to from generating the log file twice.
* The new rules for the log file location are:
The -log path is used if present.
If -log is absent then the -destpath path is used if present.
If -log and -destpath are both absent then the current directory is used.

Trunks
* Removed automatic invocation of thdmerge.exe for technical reasons
(eac3to performs delay correction for AC3 but not for THD, leading to
a misaligned thd+ac3 file when the THD stream has a delay).

Peter

DelBoy83

https://rationalqm.us/eac3to

Post by **Rocky** » Sun Feb 04, 2024 6:56 pm

DGDemux/DGDemuxGUI 1.0.0.73:

* Demuxing now observes the playlist in and out times per clip, i.e., per M2TS. This corrects the
handling of some unusually structured disks.

hubblec4
* The -sp option is replaced with the ignore-playlist-times (-ignorepl) option. -ignorepl has the opposite
sense to -sp. When -ignorepl is given, the per-clip in and out times are ignored. If it is absent they are honored.
* The audio chop (-ch) option is removed, as it is now covered by the per-clip in and out times.
* Issues with skip first (-sf) were fixed.
* Fixed a progress string error in DGDemuxGUI.
* The user manual was updated.

https://rationalqm.us/dgdemux/binaries

Post by **Rocky** » Wed Feb 07, 2024 5:27 am

Slipstream for DGDemux 1.0.0.73:

* Fixed regression in episode demuxing.

SomeHumanPerson

https://rationalqm.us/dgdemux/binaries

Post by **Curly** » Wed Feb 07, 2024 6:27 am

Slipstream for eac3to 3.49:

* eac3to was not adding the subtitles counts to the demuxed filenames when -destpath was given.

DanDare1983

https://rationalqm.us/eac3to

Sorry, skull, I'm not making a new release just for this minor blemish. Look closely at Britney and you'll see lots of them.

Post by **Rocky** » Sun Feb 11, 2024 7:39 am

Slipstream for DGDecNV 251:

* Updated the included DGDemux.exe to the latest version.

https://rationalqm.us/dgdecnv/binaries

Post by **Rocky** » Sat Feb 17, 2024 1:43 pm

Slipstream for DGDemux linux 1.0.0.73:

* Applied latest fixes from the Windows version.

Sherman

http://rationalqm.us/dgdemux/binaries

Post by **Rocky** » Tue Feb 20, 2024 4:27 am

Please re-download the windows version of DGDemux/DGDemuxGUI 73. I had erroneously put the linux version in there when I released the linux version. Both should be fine now.

Post by **Rocky** » Thu Feb 22, 2024 5:23 am

Slipstream for DGDemux/DGDemxGUI 1.0.0.73:

* Honoring the clip in/out times was not working properly with -collapse in DGDemux.
* Increased buffer sizes in DGDemuxGUI to allow for very long playlists.
* Fixed a bug in the progress monitoring and improved the monitoring.

Schakaqt

https://rationalqm.us/dgdemux/binaries

Sherman will port the DGDemux part of it to the linux version.

Post by **Sherman** » Thu Feb 22, 2024 8:14 am

Slipstream for DGDemux linux 1.0.0.73:

* Honoring the clip in/out times was not working properly with -collapse in DGDemux.

Schakaqt

https://rationalqm.us/dgdemux/binaries

Post by **Curly** » Sat Feb 24, 2024 6:12 pm

eac3to 3.50:

* Changed the log file naming to prevent log file overwrites. The name
now includes the process PID of the invoking eac3to, e.g., "log1234.txt".
Refer to the notes file for details.
* Revised the notes file to include a description of how log files work.

https://rationalqm.us/eac3to

Post by **Rocky** » Sun Feb 25, 2024 6:15 pm

Slipstream for DGDemux/DGDemuxGUI 1.0.0.73:

* Fixed bugs with demuxing of the extra clips given by the -extras option.
Note this did not affect normal demuxing without the -extras option.

hubblec4

https://rationalqm.us/dgdemux/binaries

Post by **Sherman** » Sun Feb 25, 2024 6:35 pm

Slipstream for DGDemux linux 1.0.0.73:

* Fixed bugs with demuxing of the extra clips given by the -extras option.
Note this did not affect normal demuxing without the -extras option.

hubblec4

https://rationalqm.us/dgdemux/binaries

Post by **Rocky** » Sun Mar 03, 2024 6:24 pm

Slipstream for DGDemux/DGDemuxGUI 1.0.0.73:

* Small fix for -sf. Things go wonky if you select -sf for a playlist with
only one M2TS. OK, probably no-one is going to be foolish enough to do that,
but let's help out the foolish ones.

Now, ticking -sf with only one M2TS is
a no-op.

https://rationalqm.us/dgdemux/binaries

Post by **Curly** » Tue Mar 12, 2024 7:09 am

eac3to 3.51:

* eac3to now automatically deletes older log files so as to maintain
a maximum of 5 log files in any given directory. This is to avoid uncontrolled
accumulation of log files.

w0bble
* The notes file was updated to describe that new behavior.

https://rationalqm.us/eac3to

Post by **Rocky** » Tue Mar 12, 2024 6:49 pm

DGDecNV 252:

* Increased frame serving performance by about 33% (measured for UHD content).
* Vapoursynth support changed to API4.
* Added a temporal mode to DGDenoise().
* Added integrated versions of DGDenoise(), DGHDRtoSDR(), and DGSharpen(). These
integrated versions adhere to the CUDASynth philosophy of not copying back to the
GPU in-between filters, so filter chains defined on the DGSource() invocation run
on the GPU and transfer the final result back to the CPU at the end of the chain.
This can significantly improve performance for large frame sizes due to reduction
of load on the PCIe bus. Additional filters will be added in future versions.
* The syntax for opening a media file directly with DGSource(), rather than a DGI file, now
allows for either not demuxing all streams or demuxing all streams.
* An AVX2 version of DGDecodeNV.dll is included for slightly better performance on machines that
support AVX2.
* The DGDecodeNV user manual was brought fully up-to-date. Refer to it for explanations
of all the changes mentioned above.
* 32-bit support was dropped. If you must have it, build 251 is the recourse for you.

https://rationalqm.us/dgdecnv/binaries

Post by **Rocky** » Thu Mar 14, 2024 10:19 am

Slipstream for DGDecNV 252:

* The integrated sharpen filter shouldn't be an in-place filter. Fixed.

https://rationalqm.us/dgdecnv/binaries

Post by **Rocky** » Fri Mar 15, 2024 8:49 pm

Slipstream for DGDecNV 252:

* The last slipstream broke the integrated DGSharpen(). Fixed.

hydra3333
* Fixed a rare case of failure to create the video decoder.

AYColumbia

https://rationalqm.us/dgdecnv/binaries

Post by **Rocky** » Fri Mar 22, 2024 7:42 am

DGDecNV 253:

* Added integrated and standalone DGTweak() filter. HBD is supported.
Refer to the DGDecodeNV manual for details.
* Fixed a rare case of failure to create the video decoder.

AYColumbia
* Updated the DGDecodeNV manual.

https://rationalqm.us/dgdecnv/binaries

Post by **Rocky** » Mon Mar 25, 2024 7:50 am

Slipstream for DGDecNV 253:

* Another attempt to fix the rare failure by DGIndexNV to create the video decoder. So far, so good.

https://rationalqm.us/dgdecnv/binaries

Post by **Rocky** » Fri Mar 29, 2024 1:30 pm

DGDecNV 254:

* Added integrated and standalone DGLevels() filter. HBD is supported.
Refer to the DGDecodeNV manual for details.
* Fixed a bug in the standalone DGDenoise() filter for 64-bit.
* Updated the DGDecodeNV manual.

https://rationalqm.us/dgdecnv/binaries

Post by **Rocky** » Tue Apr 02, 2024 6:28 am

DGMPGDec 3.0.0.0:

* 32-bit no longer supported. Use 2.0.0.9 if needed.
* VFAPI no longer supported. Use 2.0.0.9 if needed.
* Parameter "indexing_path" was added.

flossy_cake
* MPEG2Source() no longer overwrites the incoming "d2v" parameter when auto-indexing.

flossy_cake
* The DGDecode manual was updated.

https://rationalqm.us/dgmpgdec/dgmpgdec3000.zip